The optimized and integrated, eco-friendly, modular system utilizing recycled CO2 for non-aqueous cleaning and surface preparation. Quickly and efficiently remove contaminants from plastic, composite, and metal, automotive and recreational vehicle parts with proven revolutionary technology. This dry cleaning process is an alternative to aqueous cleaning offering substantial energy savings and yield improvement prospects while eliminating drying times and the usage of additional chemicals. The CleanMASTER PPM prepares surfaces for painting and bonding at a fraction of the cost of traditional methods.
The ALSI CleanMASTER PPM with CE10 is a modular industrial CO2 dry cleaning system for paint prep with a 5 inch to 10 inch wide cleaning path. The ALSI CleanMASTER PPM removes dry and wet contaminants from a variety of surfaces. It requires low operational energy and minimizes CO2 consumption. Environmentally friendly, it runs continuously with a six month simple maintenance period and uses a fraction of the floor space of aqueous cleaning systems.
|CO2 consumption||40 lb/hour (18 kg) per|
cleaning head CE10
|Air Consumption||0-120 CFM (configurable)|
|Max. No. of Cleaning Heads (CE10)||2|
|Cleaning Width||10 inches (254 mm), |
CE10 has a 5 inch
(127 mm) wide path
|Power Requirements||200-240 VAC 1-phase, 50 AMP|
|Weight||550 lbs (250 kg)|
|Dimensions (L x W x H)||42” x 27” x 68” |
(1067 x 686 x 1727 mm)
|Hose Length (from CPM to CE10)||30 ft (9 meters)|
|Max. Cleaning Speed||1000 mm/s*|
Cleaning End Effectors
CO2 Cleaning End Effectors (CEE) have been specifically designed for the automotive spray paint industry to provide a wide cleaning path at high speeds to match the inline painting process.
The Cleaning End Effectors are capable of being mounted either statically or at the end of a robot to extend cleaning coverage. Hose packs are designed to be robot friendly.
|5” wide (127 mm), 10 nozzle (CE10) cleaning head - Expandable to 10” wide (254 mm), 20 nozzle (CE20) cleaning head|
|100 psi @ 90 cfm per CE10 composite spray head|
|Extremely lightweight, 7.5 lbs (3.4 kg)|
The ALSI CleanMASTER PPM with CE10 includes:
- CPM ( CO2 Processing Module) cabinet
- Two CE10 Cleaning End Effectors
- 30 ft hoses
Maintenance for the ALSI CleanMASTER PPM with CE10:
- Six month (1040 hours) filter replacement and pump o-rings replacement
- One year (2080 hours) heater replacement
Click here for ALSI Literature on CO2 Cleaning Systems.
Please contact us here.